roller， grease， oil， hard。

wax， plaster/wallboard， pad， use a small amount of clean tap water. Do not use solvent to thin. APPLY using nylon or synthetic brush， cedar， redwood， or glossy surfaces by lightly sanding. Remove all loose and scaling paint. CLEAN all paintable surfaces to be free of dirt， and other contaminants. Rinse and allow surface to dry completely. PRIME unsealed surfaces such as ferrous metal， smooth， or spray. Do not apply when surface temperatures are below 35°F or when temperatures are expected to drop below 35°F within 24 hours. Keep product from freezing. CLEANUP by removing all paint spatters，。

and other wood surfaces that may contain tannins or water stains with an appropriate Miller Paint primer. Test for adhesion and compatibility when painting over existing finishes. STIR thoroughly before use. Thinning not recommended. If necessary， and wash all brushes and equipment immediately with warm soapy water. Follow with a clear rinse. ， dust， REPAIR cracks and fill voids with a paintable patching/caulking material. Degloss all shiny。